Merge branch 'master' into laptop

.config/aerc/aerc.conf

@@ -0,0 +1,753 @@
+#
+# aerc main configuration
+
+[general]
+#
+# Used as a default path for save operations if no other path is specified.
+# ~ is expanded to the current user home dir.
+#
+#default-save-path=
+
+# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
+# operations. If set to "internal", the internal openpgp keyring will be used.
+# If set to "auto", the system gpg will be preferred unless the internal
+# keyring already exists, in which case the latter will be used.
+#
+# Default: auto
+#pgp-provider=auto
+
+# By default, the file permissions of accounts.conf must be restrictive and
+# only allow reading by the file owner (0600). Set this option to true to
+# ignore this permission check. Use this with care as it may expose your
+# credentials.
+#
+# Default: false
+#unsafe-accounts-conf=false
+
+# Output log messages to specified file. A path starting with ~/ is expanded to
+# the user home dir. When redirecting aerc's output to a file using > shell
+# redirection, this setting is ignored and log messages are printed to stdout.
+#
+#log-file=
+
+# Only log messages above the specified level to log-file. Supported levels
+# are: trace, debug, info, warn and error. When redirecting aerc's output to
+# a file using > shell redirection, this setting is ignored and the log level
+# is forced to trace.
+#
+# Default: info
+#log-level=info
+
+# Set the $TERM environment variable used for the embedded terminal.
+#
+# Default: xterm-256color
+term=xterm-256color
+
+# Display OSC8 strings in the embedded terminal
+#
+# Default: false
+#enable-osc8=false
+
+# Default shell command to use for :menu. This will be executed with sh -c and
+# will run in an popover dialog.
+#
+# Any occurrence of %f will be replaced by a temporary file path where the
+# command is expected to write output lines to be consumed by :menu. Otherwise,
+# the lines will be read from the command's standard output.
+#
+# Examples:
+#   default-menu-cmd=fzf
+#   default-menu-cmd=fzf --multi
+#   default-menu-cmd=dmenu -l 20
+#   default-menu-cmd=ranger --choosefiles=%f
+#
+#default-menu-cmd=
+
+[ui]
+border-char-vertical="│"
+border-char-horizontal="─"
+styleset-name=catppuccin-mocha
+
+#
+# Describes the format for each row in a mailbox view. This is a comma
+# separated list of column names with an optional align and width suffix. After
+# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment
+# characters can be added (by default, left) followed by an optional width
+# specifier. The width is either an integer representing a fixed number of
+# characters, or a percentage between 1% and 99% representing a fraction of the
+# terminal width. It can also be one of the '*' (auto) or '=' (fit) special
+# width specifiers. Auto width columns will be equally attributed the remaining
+# terminal width. Fit width columns take the width of their contents. If no
+# width specifier is set, '*' is used by default.
+#
+# Default: date<20,name<17,flags>4,subject<*
+#index-columns=date<20,name<17,flags>4,subject<*
+
+#
+# Each name in index-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Here are some examples to show the To field instead of the From field for
+# an email (modifying column-name):
+#
+# 1. a generic one
+#   column-name={{ .Peer | names | join ", " }}
+# 2. based upon the selected folder
+#   column-name={{if match .Folder "^(Gesendet|Sent)$"}}{{index (.To | names) 0}}{{else}}{{index (.From | names) 0}}{{end}}
+#
+# Default settings
+#column-date={{.DateAutoFormat .Date.Local}}
+#column-name={{index (.From | names) 0}}
+#column-flags={{.Flags | join ""}}
+#column-subject={{.ThreadPrefix}}{{if .ThreadFolded}}{{printf "{%d}" .ThreadCount}}{{end}}{{.Subject}}
+
+#
+# String separator inserted between columns. When the column width specifier is
+# an exact number of characters, the separator is added to it (i.e. the exact
+# width will be fully available for the column contents).
+#
+# Default: "  "
+#column-separator="  "
+
+#
+# See time.Time#Format at https://godoc.org/time#Time.Format
+#
+# Default: 2006-01-02 03:04 PM (ISO 8601 + 12 hour time)
+timestamp-format=2006-01-02 15:04
+
+#
+# Index-only time format for messages that were received/sent today.
+# If this is not specified, timestamp-format is used instead.
+#
+#this-day-time-format=
+
+#
+# Index-only time format for messages that were received/sent within the last
+# 7 days. If this is not specified, timestamp-format is used instead.
+#
+#this-week-time-format=
+
+#
+# Index-only time format for messages that were received/sent this year.
+# If this is not specified, timestamp-format is used instead.
+#
+#this-year-time-format=
+
+#
+# Width of the sidebar, including the border.
+#
+# Default: 20
+sidebar-width=30
+
+#
+# Message to display when viewing an empty folder.
+#
+# Default: (no messages)
+#empty-message=(no messages)
+
+# Message to display when no folders exists or are all filtered
+#
+# Default: (no folders)
+#empty-dirlist=(no folders)
+#
+# Value to set {{.Subject}} template to when subject is empty.
+#
+# Default: (no subject)
+#empty-subject=(no subject)
+
+# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
+#
+# Default: false
+mouse-enabled=true
+
+#
+# Ring the bell when new messages are received
+#
+# Default: true
+#new-message-bell=true
+
+#
+# Template to use for Account tab titles
+#
+# Default: {{.Account}}
+#tab-title-account={{.Account}}
+
+# Marker to show before a pinned tab's name.
+#
+# Default: `
+#pinned-tab-marker='`'
+
+# Template for the left side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{.Folder}}
+#dirlist-left={{.Folder}}
+
+# Template for the right side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{if .Unread}}{{humanReadable .Unread}}/{{end}}{{if .Exists}}{{humanReadable .Exists}}{{end}}
+dirlist-right={{if .Unread}}{{humanReadable .Unread}}{{end}}
+
+# Delay after which the messages are actually listed when entering a directory.
+# This avoids loading messages when skipping over folders and makes the UI more
+# responsive. If you do not want that, set it to 0s.
+#
+# Default: 200ms
+#dirlist-delay=200ms
+
+# Display the directory list as a foldable tree that allows to collapse and
+# expand the folders.
+#
+# Default: false
+dirlist-tree=true
+
+# If dirlist-tree is enabled, set level at which folders are collapsed by
+# default. Set to 0 to disable.
+#
+# Default: 0
+#dirlist-collapse=0
+
+# List of space-separated criteria to sort the messages by, see *sort*
+# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
+# reverses that criterion.
+#
+# Example: "from -r date"
+#
+#sort=
+
+# Moves to next message when the current message is deleted
+#
+# Default: true
+#next-message-on-delete=true
+
+# Automatically set the "seen" flag when a message is opened in the message
+# viewer.
+#
+# Default: true
+#auto-mark-read=true
+
+# The directories where the stylesets are stored. It takes a colon-separated
+# list of directories. If this is unset or if a styleset cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
+#   /usr/local/share/aerc/stylesets
+#   /usr/share/aerc/stylesets
+#
+#stylesets-dirs=
+
+# Uncomment to use box-drawing characters for vertical and horizontal borders.
+#
+# Default: " "
+#border-char-vertical=" "
+#border-char-horizontal=" "
+
+# Sets the styleset to use for the aerc ui elements.
+#
+# Default: default
+
+# Activates fuzzy search in commands and their arguments: the typed string is
+# searched in the command or option in any position, and need not be
+# consecutive characters in the command or option.
+#
+# Default: false
+#fuzzy-complete=false
+
+# How long to wait after the last input before auto-completion is triggered.
+#
+# Default: 250ms
+#completion-delay=250ms
+
+# The minimum required characters to allow auto-completion to be triggered after
+# completion-delay.
+#
+# Setting this to "manual" disables automatic completion, leaving only the
+# manually triggered completion with the $complete key (see aerc-binds(5) for
+# more details).
+#
+# Default: 1
+#completion-min-chars=1
+
+#
+# Global switch for completion popovers
+#
+# Default: true
+#completion-popovers=true
+
+# Uncomment to use UTF-8 symbols to indicate PGP status of messages
+#
+# Default: ASCII
+#icon-unencrypted=
+#icon-encrypted=✔
+#icon-signed=✔
+#icon-signed-encrypted=✔
+#icon-unknown=✘
+#icon-invalid=⚠
+
+# Reverses the order of the message list. By default, the message list is
+# ordered with the newest (highest UID) message on top. Reversing the order
+# will put the oldest (lowest UID) message on top. This can be useful in cases
+# where the backend does not support sorting.
+#
+# Default: false
+#reverse-msglist-order = false
+
+# Reverse display of the mesage threads. Default order is the the intial
+# message is on the top with all the replies being displayed below. The
+# reverse option will put the initial message at the bottom with the
+# replies on top.
+#
+# Default: false
+#reverse-thread-order=false
+
+# Sort the thread siblings according to the sort criteria for the messages. If
+# sort-thread-siblings is false, the thread siblings will be sorted based on
+# the message UID in ascending order. This option is only applicable for
+# client-side threading with a backend that enables sorting. Note that there's
+# a performance impact when sorting is activated.
+#
+# Default: false
+#sort-thread-siblings=false
+
+#[ui:account=foo]
+#
+# Enable a threaded view of messages. If this is not supported by the backend
+# (IMAP server or notmuch), threads will be built by the client.
+#
+# Default: false
+#threading-enabled=false
+
+# Force client-side thread building
+#
+# Default: false
+#force-client-threads=false
+
+# Show thread context enables messages which do not match the current query (or
+# belong to the current mailbox) to be shown for context. These messages can be
+# styled separately using "msglist_thread_context" in a styleset. This feature
+# is not supported by all backends
+#
+# Default: false
+#show-thread-context=false
+
+# Debounce client-side thread building
+#
+# Default: 50ms
+#client-threads-delay=50ms
+
+#
+# Thread prefix customization:
+
+#
+# Customize the thread prefix appearance by selecting the arrow head.
+#
+# Default: ">"
+#thread-prefix-tip = ">"
+
+#
+# Customize the thread prefix appearance by selecting the arrow indentation.
+#
+# Default: " "
+#thread-prefix-indent = " "
+
+#
+# Customize the thread prefix appearance by selecting the vertical extension of
+# the arrow.
+#
+# Default: "│"
+#thread-prefix-stem = "│"
+
+#
+# Customize the thread prefix appearance by selecting the horizontal extension
+# of the arrow.
+#
+# Default: ""
+#thread-prefix-limb = ""
+
+#
+# Customize the thread prefix appearance by selecting the folded thread
+# indicator.
+#
+# Default: ""
+#thread-prefix-folded = ""
+
+#
+# Customize the thread prefix appearance by selecting the unfolded thread
+# indicator.
+#
+# Default: ""
+#thread-prefix-unfolded = ""
+
+#
+# Customize the thread prefix appearance by selecting the first child connector.
+#
+# Default: ""
+#thread-prefix-first-child = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if
+# the message has siblings.
+#
+# Default: "├─"
+#thread-prefix-has-siblings = "├─"
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and no children.
+#
+# Default: ""
+#thread-prefix-lone = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector for the last
+# sibling.
+#
+# Default: "└─"
+#thread-prefix-last-sibling = "└─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# the last sibling.
+#
+# Default: "┌─"
+#thread-prefix-last-sibling-reverse = "┌─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the first child
+# connector.
+#
+# Default: ""
+#thread-prefix-first-child-reverse = ""
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector
+# used if the message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan-reverse = ""
+
+[statusline]
+#
+# Describes the format for the status line. This is a comma separated list of
+# column names with an optional align and width suffix. See [ui].index-columns
+# for more details. To completely mute the status line except for push
+# notifications, explicitly set status-columns to an empty string.
+#
+# Default: left<*,center:=,right>*
+#status-columns=left<*,center:=,right>*
+
+#
+# Each name in status-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Default settings
+#column-left=[{{.Account}}] {{.StatusInfo}}
+#column-center={{.PendingKeys}}
+#column-right={{.TrayInfo}}
+
+#
+# String separator inserted between columns.
+# See [ui].column-separator for more details.
+#
+#column-separator=" "
+
+# Specifies the separator between grouped statusline elements.
+#
+# Default: " | "
+#separator=" | "
+
+# Defines the mode for displaying the status elements.
+# Options: text, icon
+#
+# Default: text
+#display-mode=text
+
+[viewer]
+#
+# Specifies the pager to use when displaying emails. Note that some filters
+# may add ANSI codes to add color to rendered emails, so you may want to use a
+# pager which supports ANSI codes.
+#
+# Default: less -Rc
+# pager=less -Rc
+pager=nvim -u $XDG_CONFIG_HOME/nvim/aerc.lua
+
+#
+# If an email offers several versions (multipart), you can configure which
+# mimetype to prefer. For example, this can be used to prefer plaintext over
+# html emails.
+#
+# Default: text/plain,text/html
+#alternatives=text/plain,text/html
+
+#
+# Default setting to determine whether to show full headers or only parsed
+# ones in message viewer.
+#
+# Default: false
+#show-headers=false
+
+#
+# Layout of headers when viewing a message. To display multiple headers in the
+# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
+# none of their specified headers are present in the message.
+#
+# Default: From|To,Cc|Bcc,Date,Subject
+#header-layout=From|To,Cc|Bcc,Date,Subject
+
+# Whether to always show the mimetype of an email, even when it is just a single part
+#
+# Default: false
+#always-show-mime=false
+
+# Define the maximum height of the mimetype switcher before a scrollbar is used.
+# The height of the mimetype switcher is restricted to half of the display
+# height. If the provided value for the height is zero, the number of parts will
+# be used as the height of the type switcher.
+#
+# Default: 0
+#max-mime-height = 0
+
+# Parses and extracts http links when viewing a message. Links can then be
+# accessed with the open-link command.
+#
+# Default: true
+#parse-http-links=true
+
+[compose]
+#
+# Specifies the command to run the editor with. It will be shown in an embedded
+# terminal, though it may also launch a graphical window if the environment
+# supports it. Defaults to $EDITOR, or vi.
+#editor=
+
+#
+# When set, aerc will create and read .eml files for composing that have
+# non-standard \n linebreaks. This is only relevant if the used editor does not
+# support CRLF linebreaks.
+#
+#lf-editor=false
+
+#
+# Default header fields to display when composing a message. To display
+# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
+#
+# Default: To|From,Subject
+#header-layout=To|From,Subject
+
+#
+# Edit headers into the text editor instead than separate fields.
+#
+# When this is true, address-book-cmd is not supported and address completion
+# is left to the editor itself. Also, displaying multiple headers on the same
+# line is not possible.
+#
+# Default: false
+#edit-headers=false
+
+#
+# Specifies the command to be used to tab-complete email addresses. Any
+# occurrence of "%s" in the address-book-cmd will be replaced with what the
+# user has typed so far.
+#
+# The command must output the completions to standard output, one completion
+# per line. Each line must be tab-delimited, with an email address occurring as
+# the first field. Only the email address field is required. The second field,
+# if present, will be treated as the contact name. Additional fields are
+# ignored.
+#
+# This parameter can also be set per account in accounts.conf.
+#address-book-cmd=
+
+# Specifies the command to be used to select attachments. Any occurrence of
+# '%s' in the file-picker-cmd will be replaced with the argument <arg>
+# to :attach -m <arg>. Any occurence of '%f' will be replaced by the
+# location of a temporary file, from which aerc will read the selected files.
+#
+# If '%f' is not present, the command must output the selected files to
+# standard output, one file per line. If it is present, then aerc does not
+# capture the standard output and instead reads the files from the temporary
+# file which should have the same format.
+#file-picker-cmd=
+
+#
+# Allow to address yourself when replying
+#
+# Default: true
+#reply-to-self=true
+
+# Warn before sending an email with an empty subject.
+#
+# Default: false
+#empty-subject-warning=false
+
+#
+# Warn before sending an email that matches the specified regexp but does not
+# have any attachments. Leave empty to disable this feature.
+#
+# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The
+# "(?im)" flags are set by default (case-insensitive and multi-line).
+#
+# Example:
+# no-attachment-warning=^[^>]*attach(ed|ment)
+#
+#no-attachment-warning=
+
+#
+# When set, aerc will generate "format=flowed" bodies with a content type of
+# "text/plain; format=flowed" as described in RFC3676. This format is easier to
+# handle for some mailing software, and generally just looks like ordinary
+# text. To actually make use of this format's features, you'll need support in
+# your editor.
+#
+#format-flowed=false
+
+[multipart-converters]
+#
+# Converters allow to generate multipart/alternative messages by converting the
+# main text/plain part into any other MIME type. Only exact MIME types are
+# accepted. The commands are invoked with sh -c and are expected to output
+# valid UTF-8 text.
+#
+# Example (obviously, this requires that you write your main text/plain body
+# using the markdown syntax):
+text/html=pandoc -f markdown -t html --standalone
+
+[filters]
+#
+# Filters allow you to pipe an email body through a shell command to render
+# certain emails differently, e.g. highlighting them with ANSI escape codes.
+#
+# The commands are invoked with sh -c. The following folders are prepended to
+# the system $PATH to allow referencing filters from their name only:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/filters
+#   ~/.local/libexec/aerc/filters
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/filters
+#   $PREFIX/libexec/aerc/filters
+#   $PREFIX/share/aerc/filters
+#   /usr/libexec/aerc/filters
+#   /usr/share/aerc/filters
+#
+# If you want to run a program in your default $PATH which has the same name
+# as a builtin filter (e.g. /usr/bin/colorize), use its absolute path.
+#
+# The following variables are defined in the filter command environment:
+#
+#   AERC_MIME_TYPE      the part MIME type/subtype
+#   AERC_FORMAT         the part content type format= parameter
+#   AERC_FILENAME       the attachment filename (if any)
+#   AERC_SUBJECT        the message Subject header value
+#   AERC_FROM           the message From header value
+#
+# The first filter which matches the email's mimetype will be used, so order
+# them from most to least specific.
+#
+# You can also match on non-mimetypes, by prefixing with the header to match
+# against (non-case-sensitive) and a comma, e.g. subject,text will match a
+# subject which contains "text". Use header,~regex to match against a regex.
+
+text/plain=cat
+text/calendar=gnome-calendar
+message/delivery-status=cat
+message/rfc822=cat
+text/html=pandoc -f html -t plain
+#text/html=html | colorize
+text/*=bat -fP --file-name="$AERC_FILENAME"
+application/x-sh=bat -fP -l sh
+#image/*=catimg -w $(tput cols) -
+#subject,~Git(hub|lab)=lolcat -f
+#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize
+
+# This special filter is only used to post-process email headers when
+# [viewer].show-headers=true
+# By default, headers are piped directly into the pager.
+#
+# .headers=colorize
+
+[openers]
+#
+# Openers allow you to specify the command to use for the :open and :open-link
+# actions on a per-MIME-type basis. The :open-link URL scheme is used to
+# determine the MIME type as follows: x-scheme-handler/<scheme>.
+#
+# {} is expanded as the temporary filename or URL to be opened with proper
+# shell quoting. If it is not encountered in the command, the filename/URL will
+# be appended to the end of the command. The command will then be executed with
+# `sh -c`.
+#
+# Like [filters], openers support basic shell globbing. The first opener which
+# matches the part's MIME type (or URL scheme handler MIME type) will be used,
+# so order them from most to least specific.
+#
+# Examples:
+# x-scheme-handler/irc=hexchat
+# x-scheme-handler/http*=printf '%s' {} | wl-copy
+# text/html=surf -dfgms
+# text/plain=gvim {} +125
+# message/rfc822=thunderbird
+
+[hooks]
+#
+# Hooks are triggered whenever the associated event occurs.
+
+#
+# Executed when a new email arrives in the selected folder
+#mail-received=notify-send "[$AERC_ACCOUNT/$AERC_FOLDER] New mail from $AERC_FROM_NAME" "$AERC_SUBJECT"
+
+#
+# Executed when mail is deleted from a folder
+#mail-deleted=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc adds mail to a folder
+#mail-added=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc starts
+#aerc-startup=aerc :terminal calcurse && aerc :next-tab
+
+#
+# Executed when aerc shuts down.
+#aerc-shutdown=
+
+[templates]
+# Templates are used to populate email bodies automatically.
+#
+
+# The directories where the templates are stored. It takes a colon-separated
+# list of directories. If this is unset or if a template cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
+#   /usr/local/share/aerc/templates
+#   /usr/share/aerc/templates
+#
+#template-dirs=
+
+# The default template to be used for new messages.
+#
+# default: new_message
+#new-message=new_message
+
+# The default template to be used for quoted replies.
+#
+# default: quoted_reply
+#quoted-reply=quoted_reply
+
+# The default template to be used for forward as body.
+#
+# default: forward_as_body
+#forwards=forward_as_body

.config/aerc/binds.conf

@@ -0,0 +1,172 @@
+# Binds are of the form <key sequence> = <command to run>
+# To use '=' in a key sequence, substitute it with "Eq": "<Ctrl+Eq>"
+# If you wish to bind #, you can wrap the key sequence in quotes: "#" = quit
+
+<C-p> = :menu -adc 'fzy -l 30' :cf -a<Enter>
+<tab> = :next-tab<Enter>
+? = :help keys<Enter>
+<F5> = :check-mail<Enter>
+
+# <C-c> = :prompt 'Quit?' quit<Enter>
+# <C-q> = :prompt 'Quit?' quit<Enter>
+# <C-z> = :suspend<Enter>
+
+[messages]
+q = :q<Enter>
+<Backspace> = :q<Enter>
+
+j = :next<Enter>
+# <Down> = :next<Enter>
+# <C-d> = :next 50%<Enter>
+# <C-f> = :next 100%<Enter>
+# <PgDn> = :next 100%<Enter>
+
+k = :prev<Enter>
+<Up> = :prev<Enter>
+# <C-e> = :prev 50%<Enter>
+# <C-d> = :prev 100%<Enter>
+# <PgUp> = :prev 100%<Enter>
+g = :select 0<Enter>
+G = :select -1<Enter>
+
+J = :next-folder<Enter>
+K = :prev-folder<Enter>
+
+v = :mark -t<Enter>
+# <Space> = :mark -t<Enter>:next<Enter>
+V = :mark -v<Enter>
+<Space> = :read<Enter>
+<C-Space> = :unread<Enter>
+
+T = :toggle-threads<Enter>
+# zc = :fold<Enter>
+# zo = :unfold<Enter>
+# za = :fold -t<Enter>
+# zM = :fold -a<Enter>
+# zR = :unfold -a<Enter>
+# <C-p> = :fold -t<Enter>
+
+<Enter> = :view<Enter>
+d = :prompt 'Really delete this message?' 'delete-message'<Enter>
+D = :delete<Enter>
+a = :archive flat<Enter>
+A = :unmark -a<Enter>:mark -T<Enter>:archive flat<Enter>
+
+c = :compose<Enter>
+m = :compose<Enter>
+
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+c = :cf<space>
+$ = :term<space>
+! = :term<space>
+| = :pipe<space>
+
+/ = :search<space>
+\ = :filter<space>
+n = :next-result<Enter>
+N = :prev-result<Enter>
+<Esc> = :clear<Enter>
+
+s = :split<Enter>
+S = :vsplit<Enter>
+
+pl = :patch list<Enter>
+pa = :patch apply <Tab>
+pd = :patch drop <Tab>
+pb = :patch rebase<Enter>
+pt = :patch term<Enter>
+ps = :patch switch <Tab>
+
+[messages:folder=Drafts]
+<Enter> = :recall<Enter>
+
+[view]
+/ = :toggle-key-passthrough<Enter>/
+q = :close<Enter>
+O = :open<Enter>
+o = :open<Enter>
+S = :save<space>
+| = :pipe<space>
+D = :delete<Enter>
+A = :archive flat<Enter>
+
+<C-l> = :open-link <space>
+
+f = :forward<Enter>
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+H = :toggle-headers<Enter>
+<C-k> = :prev-part<Enter>
+<C-Up> = :prev-part<Enter>
+<C-j> = :next-part<Enter>
+<C-Down> = :next-part<Enter>
+J = :next<Enter>
+<C-Right> = :next<Enter>
+K = :prev<Enter>
+<C-Left> = :prev<Enter>
+
+[view::passthrough]
+$noinherit = true
+$ex = <C-x>
+<Esc> = :toggle-key-passthrough<Enter>
+
+[compose]
+# Keybindings used when the embedded terminal is not selected in the compose
+# view
+$noinherit = true
+$ex = <C-x>
+$complete = <C-o>
+<C-k> = :prev-field<Enter>
+<C-Up> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<C-Down> = :next-field<Enter>
+<A-p> = :switch-account -p<Enter>
+<C-Left> = :switch-account -p<Enter>
+<A-n> = :switch-account -n<Enter>
+<C-Right> = :switch-account -n<Enter>
+<tab> = :next-field<Enter>
+<backtab> = :prev-field<Enter>
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+
+[compose::editor]
+# Keybindings used when the embedded terminal is selected in the compose view
+$noinherit = true
+$ex = <C-x>
+<C-k> = :prev-field<Enter>
+<C-Up> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<C-Down> = :next-field<Enter>
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+
+[compose::review]
+# Keybindings used when reviewing a message to be sent
+y = :send<Enter>
+n = :abort<Enter>
+v = :preview<Enter>
+p = :postpone<Enter>
+q = :choose -o d discard abort -o p postpone postpone<Enter>
+e = :edit<Enter>
+a = :attach<space>
+d = :detach<space>
+
+[terminal]
+$noinherit = true
+$ex = <C-x>
+
+<C-p> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-PgDn> = :next-tab<Enter>

.config/aerc/map.conf

@@ -0,0 +1 @@
+Inbox=tag:inbox and not tag:archived and not tag:deleted

.config/aerc/stylesets/catppuccin-mocha

@@ -0,0 +1,58 @@
+*.default=true
+*.normal=true
+
+default.fg=#abb2bf
+default.bg=#11121D
+*.bg=#11121D
+
+error.fg=#f38ba8
+warning.fg=#fab387
+success.fg=#a6e3a1
+
+tab.fg=#6c7086
+tab.bg=#181825
+tab.selected.fg=#cdd6f4
+tab.selected.bg=#023269
+tab.selected.bold=true
+
+part*.selected.bg=#023269
+
+border.fg=#023269
+border.bold=true
+
+msglist_unread.bold=true
+msglist_unread.fg=#f9e2af
+msglist_flagged.fg=#e06c75
+
+msglist_flagged.bold=true
+msglist_result.fg=#89b4fa
+msglist_result.bold=true
+msglist_*.selected.bold=true
+msglist_*.selected.bg=#023269
+msglist_*.bg=#11121D
+
+dirlist_*.selected.bold=true
+dirlist_*.selected.bg=#023269
+dirlist_*.bg=#181825
+
+statusline_default.fg=#9399b2
+statusline_default.bg=#2C3043
+statusline_error.bold=true
+statusline_success.bold=true
+
+spinner.bg=#11121D
+
+[viewer]
+header.bg=#181825
+url.fg=#89b4fa
+url.underline=true
+header.bold=true
+signature.dim=true
+diff_meta.bold=true
+diff_chunk.fg=#89b4fa
+diff_chunk_func.fg=#89b4fa
+diff_chunk_func.bold=true
+diff_add.fg=#a6e3a1
+diff_del.fg=#f38ba8
+quote_*.fg=#6c7086
+quote_1.fg=#9399b2

.config/hypr/hyprland.conf

@@ -121,7 +121,8 @@ bind = $mainMod, return, exec, $scripts/launch_alacritty.sh $(hyprctl activewind
 bind = $mainMod SHIFT, return, exec, alacritty
 bind = $mainMod, Q, killactive,
 bind = $mainMod, A, exec, nautilus
-bind = $mainMod, B, exec, firefox
+bind = $mainMod, S, exec, gnome-calendar
+bind = $mainMod, B, exec, MOZ_ENABLE_WAYLAND=1 firefox
 bind = $mainMod, M, fullscreen, 1
 bind = $mainMod, F11, fullscreen
 bind = $mainMod, F, togglefloating,

.config/nvim/aerc.lua

@@ -0,0 +1,17 @@
+require('settings')
+require('mappings')
+
+local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
+if not vim.loop.fs_stat(lazypath) then
+    vim.fn.system({
+        "git",
+        "clone",
+        "--filter=blob:none",
+        "https://github.com/folke/lazy.nvim.git",
+        "--branch=stable", -- latest stable release
+        lazypath,
+    })
+end
+vim.opt.rtp:prepend(lazypath)
+require("lazy").setup(require("plugins.catppuccin"))
+vim.opt.laststatus = 0

.config/nvim/lua/mappings.lua

@@ -4,6 +4,8 @@ vim.keymap.set("n", "k", "gk", {})
 vim.keymap.set("n", "<S-k>", "<Nop>", {})
 vim.keymap.set("t", "jj", "<C-\\><C-n>", { noremap = true, silent = true })
 vim.keymap.set("n", "<Backspace>", ":q<cr>", { noremap = true, silent = true })
+vim.keymap.set("n", "<C-Backspace>", ":q!<cr>", { noremap = true, silent = true })
+vim.keymap.set("n", ",;", ":", { noremap = true, silent = true })
 vim.keymap.set("n", "<C-U>", "<C-O>", { noremap = true })
 vim.keymap.set("n", "<S-C-U>", "g;", { noremap = true })
 vim.keymap.set("n", "<S-C-I>", "g,", { noremap = true })
@@ -18,11 +20,11 @@ vim.keymap.set({"n", "v"}, "<leader>Y", [["+Y]])
 vim.keymap.set("n", "<Tab>", "<Nop>", { noremap = true })
 vim.keymap.set("n", "<leader><space>", ":noh<cr>", { noremap = true, silent = true })
 vim.keymap.set("n", "gn", ":n<cr>", { noremap = true, silent = true })
-vim.keymap.set("n", "<leader>d", require("trouble").toggle, { noremap = true, silent = true })
+vim.keymap.set("n", "<leader>d", function () require("trouble").toggle() end, { noremap = true, silent = true })
 vim.keymap.set("n", "gi", ":ClangdSwitchSourceHeader<cr>", { noremap = true, silent = true })
 vim.keymap.set("n", "<leader>t", ":NvimTreeFindFileToggle<cr>", { noremap = true, silent = true })
-vim.keymap.set("n", "-", require("oil").open, { desc = "Open parent directory" })
+vim.keymap.set("n", "-", function () require("oil").open() end, { desc = "Open parent directory" })
-vim.keymap.set("n", "<leader>-", require("oil").open, { desc = "Open parent directory" })
+vim.keymap.set("n", "<leader>-", function () require("oil").open() end, { desc = "Open parent directory" })
 vim.keymap.set("n", "<leader>g", function () require("neogit").open({kind="replace"}) end, { noremap = true, silent = true })
 vim.keymap.set("x", "<leader>a", "<C-A>", { noremap = true, silent = true })
 vim.keymap.set("x", "<leader>x", "<C-X>", { noremap = true, silent = true })

.config/nvim/lua/plugins/oil.lua

@@ -1,11 +1,12 @@
-local function store_select()
+local function save_dir()
-    require("oil").select({}, function()
+    local dir = require("oil").get_current_dir()
+    if dir ~= nil then
         local f = io.open("/tmp/oil_dir", "w")
         if f then
-            f:write(require("oil").get_current_dir())
+            f:write(dir)
             f:close()
         end
-    end)
+    end
 end
 
 return {
@@ -14,13 +15,13 @@ return {
     opts = {
         keymaps = {
             ["g?"] = "actions.show_help",
-            ["<CR>"] = store_select,
+            ["<CR>"] = function() require("oil").select({}, save_dir) end,
             ["<leader>v"] = "actions.select_vsplit",
             ["<leader>s"] = "actions.select_split",
             ["<leader>p"] = "actions.preview",
             ["<backspace>"] = "actions.close",
             ["<leader>r"] = "actions.refresh",
-            ["-"] = "actions.parent",
+            ["-"] = function() require("oil").open(); save_dir() end,
             ["_"] = "actions.open_cwd",
             ["`"] = "actions.cd",
             ["~"] = "actions.tcd",

.config/scripts/backup.sh

@@ -30,10 +30,15 @@ echo "$ZFS_PASSPHRASE" | ssh vault /home/server/Storage/Thomas/Scripts/Mount/bor
 echo -e '\n\n\n'
 echo "Running dotfiles Backups"
 borg create -s --progress \
-    --exclude /home/server/.dotfiles/zsh/secrets.sh\
     10.4.0.1:Storage/Thomas/Borg/Dotfiles::'{hostname}-{now}' \
     /home/server/.dotfiles\
 
+echo -e '\n\n\n'
+echo "Running Calendar Backups"
+borg create -s --progress \
+    10.4.0.1:Storage/Thomas/Borg/Calendar::'{hostname}-{now}' \
+    /home/server/Containers/cal.thomasave.be\
+
 echo -e '\n\n\n'
 echo "Running Caddy Backups"
 borg create -s --progress \
@@ -156,6 +161,7 @@ borg create -s --progress \
     10.4.0.1:Storage/Thomas/Borg/Cloud::'{hostname}-{now}' \
     /home/server/Containers/pw.thomasave.be\
     /home/server/Containers/robbertave.com\
+    /home/server/Containers/cal.thomasave.be\
     /home/server/Containers/auth.thomasave.be\
     /home/server/Containers/git.thomasave.be\
     /home/server/Containers/Boaty \
@@ -193,5 +199,6 @@ borg create -s --progress \
     /home/server/Containers/auth.thomasave.be\
     /home/server/Containers/Boaty \
     /home/server/Containers/Caddy \
+    /home/server/Containers/cal.thomasave.be\
     /home/server/Containers/stats.thomasave.be \
     /home/server/Storage/Niels \

.config/zsh/.zshrc

@@ -112,24 +112,51 @@ function zvm_after_init() {
         fi
         if [ ! -f $FZY_CACHE ]; then
             PATHS=""
-            if [ -d ~/.dotfiles ]; then
+            search_dirs=(~/Workspace/ \
-                PATHS="$PATHS\n~/.dotfiles"
+                ~/Containers/ \
-                PATHS="$PATHS\n$(fd . ~/.dotfiles -t d -d 2)"
+                ~/Storage/Shared/ \
+                ~/Storage/Thomas/ \
+            )
+            for i in $search_dirs ; do
+                if [ -d $i ]; then
+                    PATHS="$PATHS\n$i"
+                    PATHS="$PATHS\n$(ssh mallorea fdfind . $i -t d -d 8)"
                 fi
-            if [ -d ~/Workspace ]; then
+            rone
-                PATHS="$PATHS\n$(ssh mallorea fdfind . ~/Workspace -t d -d 8)"
+
-            fi
+            search_dirs=(~/.config/waybar/ \
-            if [ -d ~/Containers ]; then
+                ~/.config/xmodmap/ \
-                PATHS="$PATHS\n$(fd . ~/Containers -t d -d 2)"
+                ~/.config/zsh/ \
-            fi
+                ~/.config/tmux/ \
-            if [ -d ~/Storage/Shared ]; then
+                ~/.config/vim/ \
-                PATHS="$PATHS\n/home/server/Storage/Shared"
+                ~/.config/qtile/ \
-                PATHS="$PATHS\n$(fd . ~/Storage/Shared -t d -d 2)"
+                ~/.config/rofi/ \
-            fi
+                ~/.config/scripts/ \
-            if [ -d ~/Storage/Thomas ]; then
+                ~/.config/nvim/ \
-                PATHS="$PATHS\n/home/server/Storage/Thomas"
+                ~/.config/picom/ \
-                PATHS="$PATHS\n$(fd . ~/Storage/Thomas -t d -d 5)"
+                ~/.config/polybar/ \
+                ~/.config/awesome/ \
+                ~/.config/dunst/ \
+                ~/.config/firefox/ \
+                ~/.config/git/ \
+                ~/.config/gitui/ \
+                ~/.config/helix/ \
+                ~/.config/hypr/ \
+                ~/.config/i3/ \
+                ~/.config/kitty/ \
+                ~/.config/mpv/ \
+                ~/.config/alacritty/ \
+                ~/Containers/ \
+                ~/Storage/Shared/ \
+                ~/Storage/Thomas/ \
+            )
+
+            for i in $search_dirs ; do
+                if [ -d $i ]; then
+                    PATHS="$PATHS\n$i"
+                    PATHS="$PATHS\n$(fd . $i -t d -d 5)"
                 fi
+            done
             echo -e $PATHS > $FZY_CACHE
         fi
         cd_to "$(cat $FZY_CACHE | fzy -l 20)"
@@ -257,12 +284,12 @@ alias ll='ls -lhat'
 alias clip="xsel --clipboard"
 alias compress="tar --use-compress-program=lbzip2 -cvf"
 alias vim="nvim"
-alias dotfiles='/usr/bin/git --git-dir="$HOME/.dotfiles/" --work-tree="$HOME"'
+alias dot='/usr/bin/git --git-dir="$HOME/.dotfiles/" --work-tree="$HOME"'
 alias wget=wget --hsts-file="$XDG_DATA_HOME/wget-hsts"
 alias xbindkeys="xbindkeys -f $XDG_CONFIG_HOME/xbindkeys/config"
 alias python=python3
 alias r=". ranger"
-alias v="vim . && cd \"\$(cat /tmp/oil_dir)\""
+alias v="vim . && cd \"\$(cat /tmp/oil_dir 2> /dev/null || pwd)\""
 alias cpr="rsync --archive -hh --partial --info=stats1,progress2 --modify-window=1"
 alias mvr="rsync --archive -hh --partial --info=stats1,progress2 --modify-window=1 --remove-source-files"
 alias rg="rg -i --colors 'match:bg:yellow' --colors 'match:fg:black' --colors 'match:style:nobold' --colors 'path:fg:green' --colors 'path:style:bold' --colors 'line:fg:yellow' --colors 'line:style:bold'"